By Getting tired of facing trouble with your TP-Link Extender’s 5GHz network? Don’t worry, you’re not alone. Many users encounter issues with their 5GHz network on TP-Link Extenders. In this article, we’ll explore the common reasons behind this problem and provide easy-to-follow solutions to fix the 5GHz network on your device without reset TP-Link extender. Let’s start without further ado!
Why Is Your TP-Link Extender 5GHz Not Working?
Here we are going to discuss common reasons why you are facing an extender 5 GHz network not working issue. By knowing the reasons you will easily fix the reasons
1. Wireless Interference
Wireless devices like cordless phones, microwave ovens, and even neighboring Wi-Fi networks can interfere with your 5GHz signal. This interference can lead to a weak or unstable connection.
2. Range Limitations
The 5GHz frequency has a shorter range compared to the 2.4GHz frequency. If you’re too far away from the extender, you might experience a weak or no signal on the 5GHz network.
3. Firmware Issues
Outdated or corrupted firmware can cause various connectivity problems, including issues with the 5GHz network. Keeping your extender’s firmware up-to-date is crucial.
4. Device Compatibility
Not all devices support the 5GHz frequency. Ensure that your devices are compatible with 5GHz Wi-Fi.
5. Channel Congestion
If too many devices are connected to the same 5GHz channel, it can cause congestion and slow down the network speed.
Hence, these were the contributing factors behind the TP-Link extender’s 5GHz network not working. But you don’t need to worry about these reasons. After all, we have troubleshooting tips for you that work quickly and effectively. To know about the solutions in detail you need to read out the next section in which we discuss them.
Solutions to Get TP-Link Extender 5GHz Working Again
Here are the solutions to fix 5 GHz not working. All you have to do is perform them as mentioned below without missing the steps:
Check Power & Connections
The very first thing you need to do is check the extender is plugged in and has a solid power light. Also, ensure it’s connected to your main router properly using the WPS button or Ethernet cable. If you see any issue while checking the things then correct it at the same time.
Give Power Cycle
Now you should give the power cycle to the extender. It is one of the easiest ways to fix network issues. It is seen that millions of people fix this issue by rebooting their devices. Moreover, this process also fixes the minor bugs and removes the temporary hiccups. Below we give all the instructions to reboot the device.
- Initially, turn off the device by pressing the power button.
- Second, remove it from the wall outlet.
- Third, give it 5 minutes until the device is powered off.
- Fourth, plug the extender back into the socket and turn it on.
That’s it your device is rebooted successfully. Now you can check the network of your device to ensure it is working or not. If you see that the issue is still there, then implement the further hacks.
Inspect Ethernet Cable
If you make the connection between the extender and the router via Ethernet cable then you have to check the entire cable to ensure you are using the damaged free cable or not. In case you see any damaged area on the cable then, replace it at the same time with a new one. Plus, insert it properly into the devices so that they communicate properly.
Place the Extender Well
Put the extender in a spot where it gets a good signal from your main router. Avoid obstructions like walls and electronic devices that might weaken the signal.
Update Firmware
Go to the TP-Link website, find your extender’s model, and check for any available firmware updates. Follow the instructions to update if needed.
Reset Extender
If other steps don’t work, you can reset the extender to its default settings. Look for a reset button on the extender and hold it down for about 10 seconds. Then, set up the extender again. You can follow the TP-Link extender setup steps in the user manual.
Hence, these are the reasons behind the 5 GHz network not working. You can fix this issue by implementing the aforementioned troubleshooting tips that work effectively and quickly.
