By This guide will walk you through the process of logging in to your Rockspace Extender device and setting it up for optimal performance. Whether you’re a tech-savvy individual or a beginner, this step-by-step guide will help you get your extender up and running in no time.
If you want to enjoy the fast internet speed in all the corners of your office and house with the help of Rockspace extender device, but don’t know how to do the login and setup process. Then don’t worry in this post you will get the solution to your problem. So, read or study this entire page carefully without skipping any step.
Rockspace Extender Device Pros
- To extend the WiFi signal coverage area of your office and house.
- Easy to purchase at a reasonable price.
- Kick-off all the dead spots in the area of your office and house.
- At one time you can connect many WiFi gadgets to it.
- The login and installation process of the Rockspace WiFi range extender is straightforward.
Rockspace Extender Device LEDs Mean
Power LED: Stable power LED determines that the Rockspace extender Device is turned on. The extender is turning on when the power LED starts blinking. The extender is off if the power LED is off.
WPS LED: As stable WPS LED defines that the connection between the Rockspace extender and router is successfully done. When the WPS LED starts only blinking the connection process is in progress. The WiFi-protected setup method process is completed.
Navigate Rockspace Extender Web Management Page
- To begin with, plug the Rockspace extender power plug into the power socket.
- After that, grab or take any WiFi-containing device such as a laptop, or computer.
- Now, connect the WiFi gadget to the Rockspace extender network.
- Next, on your computer open Chrome and enter the default web portal re.rockspace.local in the URL bar.
- Further, insert all the relevant details shown on the page.
- Identify the manual booklet which comes with the Rockspace extender to verify the login details.
Now, let’s jump into the Rockspace WiFi range extender configuration process.
Execute Rockspace WiFi Range Extender Installation Process
There are two ways to start the Rockspace extender device installation process.
Through WPS Button
Note: When you are doing this method then make sure your existing router must have the WPS button. If your main router does not support the WPS button then try another method to do the Rockspace extender configuration process.
- First, place the Rockspace WiFi range extender device closer to the router device.
- After that, push the main router WPS button.
- Now, push the Rockspace extender WPS button, within 15 seconds.
- Next, the WPS LED starts blinking solid on both the router and extender device.
- Solid WPS LED determines that your extender and router are successfully linked with each other.
- After the Rockspace extender device setup, place your extender in that location where you are facing slow internet speed.
By Rockspace Extender Device Web Portal
- Initially, settle the rockspace AC1200 extender power plug into the power socket.
- Now, take the computer and connect it to the Rockspace extender network.
- Next, enter re.rockspace.local default web portal in the navigation URL bar.
- For lateral attempts make a login password.
- Go to the wizard setup and pick the WiFi network that you want to extend.
- In the end, insert the password and hit on the join button to see an Extended Successfully connected notification on your display.
Resolve Extender Connection Trouble
Check the Distance Between Extender And Router
Due to the maximum distance between the router and the extender, you can face connection issues. To fix this issue, place your rockspace extender device near the host router. 10 to 15 feet distance between them is acceptable, not more than that.
Remove All Unused WiFi Gadgets
We recommend you remove those gadgets which are not in use but are still connected to the Rockspace extender network. If you want to know how to check how many gadgets are connected to the Rockspace extender network, then you will need to visit the Rockspace extender web management page and tap on connected gadgets. After doing this if you see any extra device then remove it from that list.
Power cycle Rockspace Extender
- To begin with, turn off your extender device.
- After that, take out the power plug of the rockspace WiFi range extender device from the power socket.
- Now, wait for a few minutes and turn on your rockspace extender.
- In the end, put the rockspace extender device power plug back into the power socket.
Install Rockspace Extender Latest Software Version
To download the latest software version of the rockspace extender, you will need to visit the Rockspace extender login page. After that, look for an administration option and then choose the software upgrade option. If you see any latest files then download/install that and open that on your WiFi-containing gadget. To finish this method, you will need to restart the Rockspace extender device.
Reset Rockspace Extender
At the back side of the Rockspace extender, you see the reset hole button. Push that button with a hairpin for 10 seconds. Now, all Rockspace extender LEDs will turn off. Now, your extender device is completely reset. https://www.weblogd.com/
