I tried updating the firmware on my Netgear WiFi range extender model number EX3700, but I can’t get successful. What am I doing wrong? Please help me. Are you sailing on the same boat? If you also can not update the netgear extender firmware then use the hacks given here.
Whether you have done a Netgear EX3700 setup or own any other extender model, the same hacks stay valid. So without thinking much about it, give a try to the tips and tricks mentioned in this post and get rid of the issue in a jiffy.
Netgear Extender Firmware Update Failed: Fixed
Step 1: Check the Netgear Extender Firmware File
We want you to try to update the firmware on your Netgear EX3700 extender once again. Try to manually update the firmware this time. For that, you need to download the firmware file on your PC first. If you have used the same method earlier, then you must have downloaded the firmware file previously also.
Check that this file is meant for the model that you own. Each extender model has different firmware released. In case you have not taken care of this point, then this is why you are failing in executing the process. So, download the firmware file once again keeping into consideration the extender model which is EX3700.
Step 2: Ensure Stable Power Supply
Now, before you are trying to update your extender, you need to make sure that the power supply to the extender is adequate. A fluctuating power supply is one main reason why the firmware is not getting updated.
Check the power cable and the power socket now. None of them should be damaged. If you see any of them is damaged or faulty, then replace the cable or plug the extender into some other socket.
Step 3: Verify Internet Connection for Netgear Extender Firmware
Right after you are done with checking the power supply to the extender, you need to examine the internet connection. An unstable internet connection can also be the reason why you can not update your device. So, it is to be made sure that your extender as well as the device that you are using should be receiving a stable internet connection.
You can check the Ethernet cable to ensure this or if the devices are connected wirelessly, then bring them closer to each other so that there is a smooth signal transmission.
Step 4: Try the Power Cycle Process
The next step is to try the reboot process. This will fix any temporary technical glitches that may be troubling your Netgear EX3700 extender. So power off your extender after disconnecting from the router. Let it be in this state for some time. Then, connect the extender to the power socket and turn it on. Make the connection between it and the router once again.
Step 5: Do Not Interrupt Process
Finally, try to update the firmware on your Netgear wireless extender EX3700 by accessing mywifiext setup page. Be certain that you are not interrupting the process by doing any other task online or powering off the extender. Also, do not open a new tab on the PC while the firmware is getting installed.
The Closing Note
With this, we conclude our troubleshooting guide on how to fix the Netgear EX3700 firmware failure issue. We are hopeful that you have successfully updated the firmware on your Netgear wireless extender. Now onward, keep an eye on the firmware released by Netgear. Whenever an update is ready to be installed, get it updated on your device using the tips given in this guide.