Do you use Victony WiFi range extender to stay online? Or want to enhance the performance of your device? If your answer is yes, then worry not. Here we will tell you about the Victony WiFi extender firmware update process. By doing this you can see your device gives the best performance than before.
If you are unaware about the process to update the firmware then read out the post from up to down and learn how to update the Victony extender firmware in no time.
Well, before we get into the Victony WiFi extender firmware process we would like to tell you about the basic requirements you need to complete the task in a hassle-free manner.
Prerequisites: Update Victony Extender Firmware
The Victony extender should be configured perfectly.
- A strong and stable internet connection from an internet service provider.
- Working wall outlet.
- A smart device such as a computer, smartphone, or laptop.
- Update the internet browser to access the default web URL.
- Admin details to access the dashboard of the device.
- The strong connection between the extender and the host router.
That’s all the basic things that you need to get ready in hand. Once the requirements are ready you can start the process to update the firmware.
Steps to Update Victony WiFi Extender Firmware
Power On the Device
Start the process by plugging the Victony extender into the active and damaged free power socket. After that, stabilize the device by pressing the turn-on button.
Once the device boots up you are ready to perform the next step of the procedure.
Now you should make the internet connection between the devices. You can use a wired connection as it is most reliable than a wireless connection. Make sure you use a non-damaged and quality Ethernet cable to connect the extender and the host router.
Power Up Computer or Laptop
The next step you need to do is power on the computer or laptop. You can go with any one of them according to which one you have. Make sure the device you use has an updated internet browser for the further process.
Download the Firmware
Now download the firmware of the device. To do this you need to launch the updated internet browser on your device. After that, download the latest firmware version of your Victony extender and save it at the desired location.
Access the Web URL
Open the new tab in the browser to access the default web address of the extender. Type the web URL without making typing errors. If you make any typos, then you can face the issues.
Press the Enter key to access the login portal of the device.
Log In to Extender
Now you will see the login page in which you need to fill in the Victony WiFi extender username and password.
Hit the Login button
Note: during typing the credentials of the device ensure that the caps lock of the keyboard is off.
You will redirect to the dashboard of the extender in which you need to perform the sub-steps that are mentioned below:
- Look for the Menu setting.
- Navigate the Update Firmware.
- Open the Update firmware page.
- Select the Manual update.
- Upload the downloaded firmware version.
- Wait for some time until the device is updated.
This is how you can update the Victony WiFi extender through manual methods.
Therefore, these are the steps that you have to perform to update the firmware of the Victony extender in a hassle-free manner. Once the device is updated, you will get a seamless performance from your device.